Student Manual

This task deals with the determination of an unknown capacitance inside an RC series circuit. You are provided with a Labview file ( that communicates with a circuit already laid out for you on a breadboard. You can control the input frequency (preferably between 1 and 50 Hz) and will observe the sinusoidal voltages developed across the resistor R and the input voltage. These waveforms will be shifted in time through ∆t. Hence there will be a phase difference ϕ = ω∆t where ω = 2πf, and f is the input frequency in Hz.

Software Code Labview codes
Experiment Code 1.6C
Version 6 January 2016, 2016-v1

Further Readings and References

No references found

Pictorial Procedure